Minolta CF2002 Service Manual page 97

Reinstallation Procedure
Seal
Flat Cable
Seal
Flat Cable
Double-Sided
Adhesive Tape
1. Install the LPH Assy mounting jigs.
4025D079AA
2. Unlock the LPH Assy and place the pivot tabs (at
two places) at the upper position.
4025D081AA
3. Insert the flat cable into the LPH Assy and lock
the LPH Assy.
4. Affix the seal that comes with the LPH Assy to
the location shown on the left.
NOTE
• Failure to affix the seal could cause the flat cable to
come off the LPH Assy.
4025D080AB
5. Holding onto both ends of the LPH Assy, align the
portions shown on the left and then press it down
into the locked position.
4025D082AA
D-39