Replacing The Imaging Unit (C, M, Y, Bk - Minolta CF2002 Service Manual

(3)

Replacing the Imaging Unit (C, M, Y, Bk)

Removal Procedure
1. Take out the "Imaging Unit Pull-out Tray" from the packing box.
2. Turn OFF the Power Switch.
3. Unplug the power cord.
4. Open the Front Door.
13. Hold the handle and install the Waste Toner Bot-
tle in position.
4025E009AA
14. Close the Left Door.
4025E010AA
15. Close the Right Door.
NOTE
• Make sure that the door is locked in position both
at front and rear.
16. Turn ON the Power Switch.
17. Select "Tech. Rep. Mode"
4025E021AA
and carry out Gradation Adjust.
5. Release the lock lever of the Imaging Unit.
C4004U047AA
E-22
→
"Gradation Adjust"