Minolta CF2002 Service Manual page 84

Pulley B
Pulley B
Pulley A
11. Secure the front and rear pulleys using one screw
each.
4025D058AA
12. Mount the Scanner Motor Assy.
D-19
 
4025D117AA
Front
13. Wind the bead end of the cable around pulley C
and pulley B, then hook the bead onto the Adjust-
Pulley C
able Anchor.
4002D008AA
14. Wind the hook end of the cable around pulley A
and pulley B.
4002D009AA
15. Fit the hook end of the cable to the spring and
then hook the spring to the catch in the frame.
NOTE
• Select the appropriate catch in the frame (from
among three) so that the spring measures 64.2
mm ± 1 mm.
4002D119AB
D-26