Mount The Optional Original Size Detecting Sensors - Minolta CF2002 Service Manual

4-2. MOUNT THE OPTIONAL ORIGINAL SIZE DETECTING SEN-
SORS
NOTE
• When an Original Size Detecting Sensor has been added, select "SET" in "Org. Detect
Option Sensor" of "System Input" available from the "Tech. Rep. Mode" and run "Org.
Detect Sensor" of "Machine Adjust."
1. Remove the IR Right Cover and Original Glass.
2. Remove the PWB Cover.
3. Connect the connector of the Original Size Detecting Sensor to be added to the Image
Processing Board.
4. Replacing the PWB Cover.
5. Mount the Original Size Detecting Sensor (option).
CD2
Optional for the
Europe, U.S.A., Taiwan.
G
4025D138CA
How the Harness should be Placed
FD1
CD1
CD2
FD3
Optional for the Europe, U.S.A., Taiwan.
FD2
D-71
FD1
Optional for the U.S.A.
A
E
FD3
4025D109AA