Printer Monocolor: Blurred Image - Minolta CF2002 Service Manual

(22) Printer Monocolor: blurred image

<Troubleshooting Procedure>
Section Step
Image 1 Image is distorted (stretched
Check or shrunk).
LED Assy 2 LED retracting lever is locked
in position.
3 The surface of the lens array is
dirty.
Imaging 4 Dirty on the outside.
Unit
5 The problem has been elimi-
nated through the checks of
steps up to 4.
<Typical Faulty Image>
4011T046AA
Check Item Result
T-99
Action
YES Perform "Zoom for FD."
NO Slide out the IU and reinstall.
YES Clean with cleaning jig.
YES Clean.
NO Change IU.
→
Change LPH Assy.
→
Change LPH Unit.