Erasing A Forgotten Call Log Password - Nortel Norstar System Administration Manual

178 Call services

Erasing a forgotten Call log password

Compact Plus System Administration Guide
If someone forgets their Call log password, you can reset it to
None so that they can set a new one. You cannot set a new
password using this method. You can only erase an existing one.
See "Call Log" on page 290 for information on setting a new Call
log password.
See "Chart 21: Call Log passwords" on page 332 in Appendix A
for a programming overview.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows Passwords.
5. Press ≠. The display shows COS pswds.
6. Press '. The display shows Call log pswd:.
7. Press ≠. The display shows Show extn:_.
8. Enter an extension number.
9. Press ≠. The display shows Log pswd:nnnnn.
10. Press CLR to erase the current Call log password.
11. Press ® to exit or ' to continue programming.
P0607114 Issue 01