Hospitality Services Admin Alarm Feature - Nortel Norstar System Administration Manual

Hospitality Services admin alarm feature

P0607114 Issue 01
Only an Hospitality Services (HS) admin telephone can use the
Hospitality Services admin alarm feature. The HS admin alarm
feature is room oriented only, it does not control the alarms on
common extensions.
The Hospitality Services admin feature can:
• query the current or last alarm time set for a room
• overwrite previous Alarm time programming for a room on
the system
— assign an Alarm time for any room on the system
— change an Alarm time for any room on the system
— cancel an Alarm pending for any room on the system
To programme the Alarm time for a room with the Hospitality
Services admin alarm feature:
1. Press ≤°‡‡ on a two-line display telephone.
2. If configured, the display reads Password:. Enter the Desk
admin password.
3. The display reads Al of rm#:. Enter the room number.
4. Press VIEW. The display shows Alrm: 07:00am OFF:. If the
alarm time is correct press the ON/OFF display key to activate
the alarm.
5. Enter a four-digit alarm time.
— If the 24-hour format is used (hour: 00 to 23 and minutes:
00 to 59), no confirmation is required. The display shows
Alarm hh:mm ON.
— If the 12-hour format is used, the display shows the four
digit time plus AM or PM?. Press the AM or PM display key.
The display shows Alarm hh:mm am or pm ON.
6. Press the ® key to exit programming.
Programming Hospitality Services 51
Compact Plus System Administration Guide