Nortel Norstar System Administration Manual page 82

82 Barring calls and privileges (Restrictions)
Applying restriction filters
Compact Plus System Administration Guide
• When you are finished programming restrictions for one
extension, you can copy those settings to other extensions by
using COPY at the Restrictions ˆ display. For more
information about copying extension programming, see
'Restriction service' on page 160.
• You cannot delete a filter but you can delete a restriction
within a filter. Removing the restrictions programmed on a
filter makes it an unrestricted filter, but the filter itself is not
removed.
Removing a restriction changes the
identifying number of the restriction.
Removing a restriction removes the
overrides associated with it, and changes
the identifying number of the restriction.
For example, removal of restriction 01 re-
numbers restrictions 01 to 08 as 01 to 07.
Once you create the filters, you can assign the restrictions to a
telephone (under Terminals&Extns), to a line (under Lines), to a
particular line on a telephone (under Terminals&Extns), and to
remote callers (under Remote access).
To assign restriction filters for different times of the day, see
'Restriction service' on page 160.
See 'Chart 6: Restriction filters' on page 319 in Appendix A for
a programming overview.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠. The display shows Show extn#:.
5. Enter the extension number of the telephone you want to
programme. The display shows nnn:nnn.
6. Press ≠. The display shows Line access.
7. Press ' until the display shows Restrictions.
8. Press ≠. The display shows Restrn filters.
9. Press ≠. The display shows Show filter:.
10. Enter the two-digit code or press '.
11. Press ≠.
P0607114 Issue 01