Nortel Norstar System Administration Manual page 260

260 Making external calls
Allowing a colleague to join your conference
Disconnecting one person from the conference
Using Hold on a conference
Compact Plus System Administration Guide
Normally your calls are private.You can turn Privacy off for a
call, allowing another person in your office with the same line to
press the line key and join in a conference or a two-way call.
1. While on a call, press ≤°‹.
2. Tell the other person to press the line key and join your
conversation.
Only two Norstar/BST telephones in addition to the external
caller can take part in this kind of conference.
You can disconnect one party from a conference and continue
talking to the other.
On T7208, T7316, T7316E, M7208N, M7310N, or M7324N
telephones:
1. Press the line key of the call that you want to disconnect.
The call that you want to keep is automatically put on hold.
2. Press ®. The first call is disconnected.
3. Press the line key of the held call to speak to the remaining
person.
On a T7100, M7100N, T7000, M7000 telephones:
1. Press ≤£‹ to place one caller on hold.
2. Press ≥ again to put the caller you want to keep on hold.
3. Press ®. The first call is disconnected.
4. Press ≥ to speak to the remaining party.
If you use Hold on a conference, you can
• put the two other people on hold (they cannot speak to each
other)
• put the conference on hold (the other two people can speak to
each other)
• put one person on hold while you continue to talk to the other
person
You can re-connect to the conference by pressing either of the
held line keys. For M7100N/T7100 and M7000/T7000
telephones, press ≥.
P0607114 Issue 01