Nortel Norstar System Administration Manual page 159

Add extensions for Ringing service
P0607114 Issue 01
See "Chart 17: Ringing service" on page 329 in Appendix A for
a programming overview.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' twice. The display shows Services.
5. Press ≠. The display shows Ringing service.
6. Press ≠. The display shows Ringing groups.
7. Press ' until the display shows Sched:Night.
8. Press ≠. The display shows Service:.
9. Press CHANGE to choose Manual, Auto, or Off.
10. Press ® to exit or ' to continue programming.
You can add lines within groups to ring for these services on
different extensions. For example, you might want the ring to be
heard at two locations for ease of access. To add an extension:
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' twice. The display shows Services.
5. Press ≠. The display shows Ringing service.
6. Press ≠. The display shows Ringing groups.
7. Press ≠. The display shows Ring grp: 001.
8. Press ' to cycle through the ring groups until you
find the one you want (from 001 to 100). Or, enter the number
directly on the keypad.
9. Press ≠. The display shows Show extn#:.
10. Press ' to cycle through the extensions available, or
enter the number directly on the keypad. The extension
currently assigned to Ringing service will display Assigned.
11. Press CHANGE to assign another extension to ringing service.
12. Press ® to exit or ' to continue in programming.
Compact Plus System Administration Guide
Services 159