Starting A Programming Session - Nortel Norstar System Administration Manual

18 Introduction
More about display keys
Instructions for display keys

Starting a programming session

Compact Plus System Administration Guide
Keypad key
Use the three display keys below the display on your telephone to
set and select options. Their function depends on the instruction
that appears on the display directly above each key. Some display
instructions that you may see during programming are DOWN, UP,
or OK.
Display keys
Contrast level 2
DOWN
Display keys
As administrator, the first steps in making any change to the
Compact Plus system are always the same. You must press the
≤ button and then press ••¤flfl‹›› to access
Configuration programming.
Jan1 1:00am
Feature:∫∫∫∫∫∫∫∫
∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫
Password:∫∫∫∫∫∫∫
∫∫∫∫∫∫∫∫∫∫∫RETRY
Terminals&Extns∫
∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫∫
¤‹fl›fl (ADMIN) is the password, unless the password has
been changed. Check Programming Record for the most recent
password.
press once for the letter D
press twice for the letter E
press three times for the letter F
press four times for the number 3
UP OK
Press ≤ .
Press ••¤flfl‹››
( ).
CONFIG
Press ¤‹fl›fl
Press RETRY to re-enter the password if it is
entered incorrectly.
The display shows the first of the seven
headings available for programming.
P0607114 Issue 01
Display text
( ).
ADMIN