Nortel Norstar System Administration Manual page 148

148 Moving and copying
Copying system programming to a single extension
Copying system programming to a range of extensions
Compact Plus System Administration Guide
Pressing the COPY softkey allows you to copy programming from
one extension to another extension, to a range of extensions, or to
all extensions in the system.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠ and enter the extension number whose
programming you want to copy.
5. Press COPY. The display shows Copy:SYSTEM data.
6. Press CHANGE to toggle between SYSTEM data (to copy the
programming of the system) and SYSTEM+USER (to copy the
programming of the system and the programming of a
particular extension).
7. Press '. The display shows Copy:SINGLE.
8. Press '. The display shows Copy to:.
9. Enter the extension number of the extension that will be
programmed. The display shows nnn>nnn briefly, then
returns to Copy to:.
10. Keep entering extension numbers if you have other single
extensions that you wish to programme.
11. Press CANCL when you are finished.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠ and enter the extension number whose
programming you want to copy.
5. Press COPY. The display shows Copy:SYSTEM data.
6. Press CHANGE to toggle between SYSTEM data (to copy the
programming of the system) and SYSTEM+USER (to copy the
programming of the system and the programming of a
particular extension).
7. Press '. The display shows Copy:SINGLE.
P0607114 Issue 01