Nortel Norstar System Administration Manual page 293

Action
On entering the log
View log items you have viewed before
View the last item you viewed
View new items in the log
When viewing an item
View the next item in the log
Erase the item you are viewing
View more information on this item
Trim digits from the beginning of the
number you are viewing prior to dialling
the number
Go back to the previous item
Placing a call to a number in the Call Log
P0607114 Issue 01
Use either the display keys or your keypad to navigate through
the log.
You may find it helpful to place calls from within your Call Log.
The number stored for each call may vary depending on the type
of call. For example, if the call was placed from a Centrex or PBX
system, the first few numbers may need to be shortened before
you can make the call. If the number you want to call is
long-distance, or if you want to use a line pool, you may need to
add numbers.
To place a call
1. Display the log item for the call you want to place.
2. Display the associated telephone number.
3. Dial any extra digits required.
4. Press an exchange line or line pool key.
5. Lift the handset. (This is not necessary if Handsfree is
programmed at your telephone). The displayed number is
dialled.
Using display features 293
Key Display key
• OLD
RESUME
‚
NEW
£
£ NEXT
≥ ERASE
Right side of the
MORE
volume bar
of the
Left side of
TRIM
volume bar
•
Compact Plus System Administration Guide