Assigning Intercom Keys To An Extension - Nortel Norstar System Administration Manual

Assigning intercom keys to an extension

P0607114 Issue 01
7. Press ' until the display shows Prime line:.
8. Press CHANGE to select the setting: None, Pool A, or Intcm
(intercom). Only assigned lines and line pools appear.
9. Press ® to exit or ' to continue programming.
An assigned Prime line is not associated with the assignment of a
Prime extension.
An exchange line must be assigned to the extension in Line
assignment before it can be assigned as the Prime line to the
extension.
A line pool must be assigned to the extension in line pool access
before a line pool can be assigned as the Prime line to the
extension.
By assigning a line pool as a Prime line, an extension can be made
to search automatically for an idle line in a pool.
Note: If you set Prime line to Intcm (intercom), you can still
access any line pools you have assigned to the extension.
When you enter the line pool access code, the system
searches for an idle line in that pool. When all the lines in
the pool are busy, the display shows No free lines. The
system does not search from one pool to another.
Intercom keys can provide an extension with access to internal
lines and line pools.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password :.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠. The display shows Show extn#:.
5. Enter the extension number of the telephone you want to
programme. The display shows nnn:nnn.
6. Press ≠ twice. The display shows Line
assignment.
7. Press ' until the display shows Intercom keys:.
8. Press CHANGE to select the setting: 0, 1, 2, 3, 4, 5, 6, 7, or 8.
9. Press ® to exit or ' to continue programming.
Each intercom key assigned during programming automatically
appears on the extension. The keys start with the lower right-hand
Programming Terminals and Extensions 43
Compact Plus System Administration Guide