Display Contrast; Key Inquiry - Nortel Norstar System Administration Manual

Display contrast

Key Inquiry

P0607114 Issue 01
You can adjust the contrast on your telephone display to make it
easier to read.
1. Press ≤•‡. The display shows Contrast level 4.
2. Press a number on the keypad for the contrast level you want;
or if you have a two-line telephone, press UP and DOWN to
adjust the contrast.
3. Press ≥ or OK to set the new contrast level.
Ensure that the function of a key matches its label by pressing
≤•‚ and then the key to display its function. On the
M7100N/T7100 telephones, Key Inquiry shows your extension
number followed by the function assigned to your single-memory
key.
To find out your extension number, use the Key Inquiry feature
(≤•‚) on an intercom key.
Displays
001 Line001
SHOW OK
123456789012345...
VIEW‚ OK
21 <SETNAME>
NEXT VIEW‚
<Feature name>
SHOW OK
Press a key
EXIT
Customising your telephone 225
The display shows the number and name of
the line. Press SHOW to view the redirection
status of the line.
Press £ or press VIEW‚ or ·VIEW to view a
number that is too long to fit on the display.
Press ≥ or OK when you are done.
The display shows the directory number of
the telephone and the assigned name.
Press NEXT to see the first line assigned to
ring at the intercom key.
The name of the feature assigned to a key
is displayed when you press the key. Press
£ or SHOW for additional information.
Press the key you want to check. Press
≤ or EXIT when you are finished.
Compact Plus System Administration Guide