Changing The Name Of A Schedule - Nortel Norstar System Administration Manual

Assigning extensions to a control extension

Changing the name of a schedule

P0607114 Issue 01
In addition to placing lines into Service modes, a control
extension can apply Restriction service (dialling filters) to other
extensions.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows Services.
5. Press ≠. The display shows Ringing service.
6. Press ' until the display shows Common settings.
7. Press ≠. The display shows Control extns.
8. Press ≠. The display shows For lines.
9. Press '. The display shows For extns.
10. Press ≠. The display shows Show extn#:.
11. Enter the extension number. The display shows the extension
number followed by the current control extension.
12. Press CHANGE and enter the extension number you want to
assign as the control extension for this extension.
13. Press ® to exit or ' to continue programming.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows Services.
5. Press ≠. The display shows Ringing service.
6. Press ' until the display shows Common settings.
7. Press ≠. The display shows Control extns.
8. Press '. The display shows Schedule names.
9. Press ≠. The display shows Sched 1:.
10. Press CHANGE and enter the name you want to assign to the
schedule.
11. Press ® to exit or ' to continue programming.
Compact Plus System Administration Guide
Services 169