Creating A Password To Your Call Log; Changing Your Call Log Password; Deleting An Assigned Password; Programming A Telephone To Log Calls Automatically - Nortel Enterprise Edge Feature Programming Telephone Manual

86 Tracking your incoming calls

Creating a password to your Call Log

ƒ•°fi
To access your Call Log through a password:
1. Press
ƒ•°fi
2. Enter your four-digit password. The display reads
3. Re-enter your four-digit password. The display reads
confirms that your password has been assigned.
To enter Call Log using your password:
1. Press
ƒ°⁄¤
password, the display reads
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in programming. See
Clearing a Call Log password

Changing your Call Log password

ƒ•°fi
1. Press
ƒ•°fi
2. Enter your old password. The display reads
3. Enter your new four-digit password. The display reads
4. Re-enter your password. The display reads
that your password has been changed.

Deleting an assigned password

ƒ•°fi
1. Press
ƒ•°fi
2. Enter your old password. The display reads
3. Press
˙
your password has been deleted.

Programming a telephone to log calls automatically

Your installer can program each telephone to automatically log calls coming in on
a line.
Enterprise Edge Feature Programming Telephone Guide
. The displays reads
to enter Call Log. If you have programmed a
.
Password:
on page 121.
. The display reads
. The display reads
or The display reads
OK.
.
New passwrd:
.
Repeat New:
Password changed
.
Old passwrd:
.
New passwrd:
Repeat New:
, which confirms
Password changed
.
Old passwrd:
.
New passwrd:
, which confirms that
No pswd assigned
P0908510 Issue 01
, which
.