Transfer Callback - Nortel Norstar System Administration Manual

136 Programming feature settings

Transfer callback

Compact Plus System Administration Guide
If Transfer callback is enabled, after a specified number of rings,
a transferred call that remains unanswered returns to the
telephone that made the transfer. Transfer callback allows you to
enable/disable this feature, and to specify the number of rings
before the call is returned when the feature is enabled. You can
estimate the delay in seconds if you multiply the number of rings
by three.
See 'Transferring a call' on page 253 for information on the
Transfer feature.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows System prgrming.
5. Press ≠. The display shows Hunt groups.
6. Press ' until the display shows Featr settings.
7. Press ≠. The display shows Backgrnd music.
8. Press ' until the display shows Trnsfr callbk:.
9. Press CHANGE to choose Y (Yes) or N (No).
10. Press '. The display shows Trnsfr callbk:.
11. Press CHANGE to choose 3, 4, 5, 6, or 12 rings.
12. Press ® to exit or ' to continue programming.
P0607114 Issue 01