Time And Date; Static Time; Call Duration Timer - Nortel Norstar System Administration Manual

288 Using display features

Time and Date

Checking the current time and date while on a call

Static Time

Call Duration Timer

Compact Plus System Administration Guide
The current time and date appear on the display of idle Compact
Plus telephones. Telephones connected to an Analogue Terminal
Adapter cannot display the time and date.
You can briefly display the current time and date while you are on
a call by pressing ≤°‚‹.
When you have a message or a Call Log item on the telephone
display, the time and date are not shown. The Static Time feature
allows the time and date to be displayed at all times.
• Press ≤°‚fl to turn Static Time on.
• Press ≤£°‚fl to turn Static Time off.
Use the Call Duration Timer feature to see how long you spent on
your last call or how long you have been on your present call.
By pressing ≤‡‡, you can see how long
• you spent on your last call
• you have been on your present call
Displays
21 02:47
Line001 01:45
The display shows the last call you made or
the current call, and the total elapsed time
in minutes and seconds.
You parked your last call. The display
shows the length of time the call was
parked. You cannot see the length of time a
call was parked unless the call is active at
your telephone or has just been released by
your telephone.
P0607114 Issue 01