Personal Speed Dial Codes; Using Speed Dial - Nortel Norstar System Administration Manual

Personal Speed Dial codes

Using Speed Dial

Adding or changing Personal Speed Dial
P0607114 Issue 01
You can quickly dial external telephone numbers that have been
programmed onto Speed Dial codes. Speed Dial codes
• 001 to 255 are programmed for the entire system using the
settings under System Speed Dialing heading. These codes are
valid for any telephone that is allowed to use speed dialing
keys. See 'Assigning a number to a System speed dial code'
on page 62.
• 256-279 may be programmed differently at each telephone by
the user. These can also be programmed by you as part of the
telephone programming, and changed by the user, as needed.
Speed dial numbers are generally subject to any call barring
restrictions that have been programmed in the Modular Plus
system.
System Speed Dial programming allows you to assign three-digit
Speed Dial codes to the external numbers your colleagues call
most frequently. Personal Speed Dial programming allows
individuals to programme their own Speed Dial numbers.
Speed Dial numbers are subject to the same restriction filters as
regularly dialled numbers. You can programme system Speed
Dial numbers to bypass dialling restrictions.
Speed Dial numbers may include host system signalling codes.
Note: There is no difference between using Personal Speed Dial
and using System Speed Dial. They differ only in how you
programme them, and in the code range available for each
type.
1. Press ≤•›.
2. Enter a three-digit code from 256 to 279 that you want to
associate with a telephone number.
3. To include a line selection for this number, press the line or
intercom key. To select a line pool, press a programmed line
pool key, or press the programme key labelled Intercom, and
enter a line pool access code. On the M7100N and the T7100
telephone, you can only select a line pool.
4. Enter the number you want to programme.
5. Press ≥ or OK.
Using personal features 231
Compact Plus System Administration Guide