6-6 M3903 enhanced telephone
Headset with LED
Activate this key for headset use. The LED lights when the set is in headset
mode.
Message key
This is a fixed feature key that corresponds to feature/option key 17. This key
must be programmed using SERVORD. Although it is permanently labeled as
message, it does not have to be datafilled as such. In order to access voice mail
without a message waiting, Nortel Networks recommends assigning message
to key 1 and autodial to the message key (key 17.) The autodial key should be
programmed with the voice mail system DN.
Quit key
Use the quit key for applications and features.
Call log
Use call log key to look at the call log and redial list using the navigation keys,
or with M3900 Release 3 firmware and MSL15 software Call Log and Redial
may be assigned as a context-sensitive key or programmable line/feature key.
There are 10 call log entries and five outgoing entries through the redial list.
Application key
Use this key to connect to applications located on a remote server and to access
the corporate directory application.
Shift key
Use the shift key to page between the two layers of line/feature keys.
Copy key
Use the copy key for applications and features.
Context-sensitive soft keys
Assign up to ten features on the four soft keys. The features must be assigned
to specific keys. The following list contains the features and their key numbers:
•
•
•
•
•
•
555-4001-136 Standard 04.02 May 2001
key 18 - transfer
key 19 - conference
key 20 - call forward
key 21 - ring again
key 22 - call park
key 23 - call pickup