Programming Lines And Features For Remote Access - Nortel Norstar System Administration Manual

182 Remote access

Programming lines and features for remote access

Remote access packages
Compact Plus System Administration Guide
Remote access packages allow you to control the remote use of
Compact Plus line pools, the paging feature, administration, and
monitoring of the system.
You create a remote access package by defining which of your
system line pools it will be able to access and whether it can use
Page, line pools, and remote administration. You then assign the
package to individual lines (using Rem line access), and to a
particular Class of Service password.
Remote access packages defaults
Parameter Square PBX
Package 00 Prohibits remote access to line pools, Page,
remote monitoring and administration. Cannot
be changed.
Package 01
Line pool access Y for Pool A
N for Pools B and C
Remote Page, No
administration, and
monitoring
Packages 02 - 15
Line pool access N for Pools A to C
Remote Page, No
administration, and
monitoring
You can use COPY and the keypad to copy settings from one
remote package to another.
The line pool access display shows an alphabetic line pool
identifier, followed by a numeric line pool access code in
parentheses (for example, PoolA (9):N). If no access code has
been identified, there is nothing between the brackets (for
example PoolA ( ):N). The line pool access code can be
programmed under Terminals&Extns.
Remote access package 00 is the default setting for the Remote
access package setting. It does not permit access to line pools or
to remote paging. Unlike packages 01 to 15, package 00 cannot
be changed.
You can define up to 15 remote access packages (01 to 15).
For remote users who call into the Compact Plus system to use
lines for calling out, the remote restrictions and line restrictions
still apply.
Hybrid
P0607114 Issue 01