Making A Speed Dial Call - Nortel Norstar System Administration Manual

232 Using personal features

Making a Speed Dial call

Compact Plus System Administration Guide
Displays storing and dialling a Personal Speed Dial number
9_
CANCL BKSP OK
Enter digits
QUIT OK
Error code:
No number stored
Program and HOLD
Program and OK
QUIT OK
Select a line
Unknown number
Speed dial>
No free lines
LATER
To make a call using a personal or System Speed Dial code:
1. Press ≤‚.
2. Enter the appropriate three-digit Speed Dial code (001-279).
Continue entering the number you wish to
programme. You can change the number
by pressing BKSP or √
you are finished, press ≥
Enter the telephone number you wish to
programme exactly as you would if you
were dialling it normally. When you are
finished, press ≥ or OK. This message
appears only after you select a line or line
pool.
Enter a three-digit number between 256
and 279 to select the code for
programming.
There is no number stored on the speed
dial code you have dialled.
On the M7100N, M7208N, T7100 and
T7208 telephones, if you want to
programme a line or line pool selection for
this speed dial number, select the line or
line pool. Otherwise, enter the telephone
number exactly as you would if you were
dialling it normally. When you are finished,
press ≥ .
If you want to programme a line or line
pool selection for this speed dial number,
select the line or line pool. Otherwise,
enter the telephone number you wish to
programme exactly as you would if you
were dialling it normally. When you are
finished, press OK.
There is no line associated with the speed
dial number you are trying to use. Select a
free exchange line or line pool, and enter
the speed dial feature code again.
The system cannot dial the number
stored.
Re-programme the number.
Enter a three-digit number between 001
and 279 to select the code for dialling.
All lines are busy. Press LATER, then YES to
have the system notify you when a line is
free.
P0607114 Issue 01
. When
or OK.