Moving Line Keys - Nortel Norstar System Administration Manual

226 Customising your telephone
Labelling keys on the telephone

Moving line keys

Compact Plus System Administration Guide
After programming a key on your telephone, you may wish to
label it.
Norstar M-series telephones also have key pre-labelled key caps.
When you are labelling or removing a key cap, activate Key
Inquiry (≤•‚) first so that you do not accidentally activate
a feature.
Note: On M7100N/T7100 telephones, Key Inquiry shows your
extension number followed by the function assigned to
your single-memory key. This is usually Last Number
Redial.
To remove a key cap, slip the fingernails of your index fingers
under each end of the key cap and pull up until it pops off. If you
do not have a printed key cap to replace it, you can write the name
in the blank label space beside the key.
The T-series telephones are labelled beside the buttons. You can
use Desktop Assistant to make changes and print a new label
card. Your system administrator can access this application from
the system CD or download it from
http://www.nortelnetworks.com (Customer Support/Software
Distribution, under Product Selection choose Desktop Assistant).
You can move exchange lines to different keys on your telephone.
Use this feature to arrange your lines as you prefer.
1. Press ≤•°⁄.
2. Press the key you want to move the line from.
3. Press the key you want to move the line to.
4. Press ≤ or QUIT when you are finished moving lines.
Note: You also use this feature code to move hunt group
appearances.
Displays
The two keys you selected have exchanged
Exchanged
position.
Invalid location You have tried to move a line to a key that cannot
be used as a line key, such as an intercom key,
Handsfree/Mute key, or an Answer key.
Press the key of the line you want to move. Press
Move line from:
≤
QUIT
lines.
or QUIT when you have finished moving
P0607114 Issue 01