Assigning Filters To A Telephone (Extn Restrns) - Nortel Norstar System Administration Manual

Assigning filters to a telephone (Extn restrns)

P0607114 Issue 01
12. Use REMOVE, ADD, the keypad, and OK to change the
restrictions for the filter.
13. Press ≠, then ' to see the overrides for the
restriction.
14. Use REMOVE, ADD, the keypad, and OK to change the overrides
for the restriction.
15. Press ® to quit or ' to continue programming.
Extension restrictions allows you to assign a restriction filter to a
telephone to prevent certain numbers from being dialled from
that telephone. You can assign a different restriction filter for
normal service and for each of six schedules.
See 'Using alternate or scheduled services' on page 158 for more
information about the schedules.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠. The display shows Show extn#:.
5. Enter the extension number of the telephone you want to
programme. The display shows nnn:nnn.
6. Press ≠. The display shows Line access.
7. Press ' until the display shows Restrictions.
8. Press ≠. The display shows Restrn filters.
9. Press ' The display shows Extn restrns.
.
10. Press ≠. The display shows Filters.
11. Press ≠. The display shows Normal:.
12. Press CHANGE and use the keypad to enter the number of the
restriction filter to be assigned to the extension for each
schedule.
13. Press ® to quit or ' to continue programming.
Barring calls and privileges (Restrictions) 83
Compact Plus System Administration Guide