Assigning An Answer Key To An Extension - Nortel Norstar System Administration Manual

44 Programming Terminals and Extensions

Assigning an Answer key to an extension

Compact Plus System Administration Guide
key, or one key above, if the Handsfree/Mute feature is assigned
to the bottom right key on the extension.
An extension needs two intercom keys to establish a conference
call with two other Norstar/BST extensions.
Only one intercom key may be required if the key is only to be
used to access line pools and to make and receive internal calls.
If an extension has several lines assigned only to ring and not
appear, the arrangement works better if there are two intercom
keys.
M7100N/T7100 telephones have two default intercom keys
which cannot be changed. These keys do not appear on the
telephone.
Calls for other Norstar/BST telephones can appear and be
answered at the extension being programmed. The extension
numbers of the other telephones are referred to as Answer
extension numbers. You can assign up to eight Answer extension
numbers to the telephone being programmed.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password :.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ≠. The display shows Show extn#:.
5. Enter the extension number of the telephone you want to
programme. The display shows nnn:nnn.
6. Press ≠ twice. The display shows Line
assignment.
7. Press ' until the display shows Answer extns.
8. Press ≠. The display shows Show extn#:.
9. Enter the extension number.
10. Press CHANGE to change the setting for the Answer extension
number: Appr&Ring, Appr only, or Unassigned.
11. To assign additional Answer extension numbers, press
–, ≠, then enter the next Answer
extension number.
12. Press SCAN to view the Answer extension numbers assigned
to this extension.
13. Press ® to exit or ' to continue programming.
P0607114 Issue 01