Nortel Norstar System Administration Manual page 88

88 Barring calls and privileges (Restrictions)
Assigning line restrictions to the COS password
Assigning a remote package to the COS password
Compact Plus System Administration Guide
9. Press '. The display shows User flt:.
10. Press CHANGE.
11. Enter the number for the restriction filter to be applied with
this COS password.
12. Press ® to exit or ' to continue programming.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press≤••¤flfl‹›› (CONFIG). The display
shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows Passwords.
5. Press ≠. The display shows COS pswds.
6. Press ≠. The displays shows Show paswd #:.
7. Enter a two-digit password (00 to 99).
8. Press ≠. The display shows the setting for that COS
password.
9. Press ' until the display shows Line flt:.
10. Press CHANGE.
11. Enter the number for the restriction that applies to the line
when this COS password is used.
12. Press ® to exit or ' to continue programming.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows Passwords.
5. Press ≠. The display shows COS pswds.
6. Press ≠. The displays shows Show paswd #:.
7. Enter a two-digit password (00 to 99).
8. Press ≠. The display shows the setting for that COS
password.
9. Press ' until the display shows Remote pkg:.
P0607114 Issue 01