Changing The Time Of A Schedule - Nortel Norstar System Administration Manual

170 Services

Changing the time of a schedule

Compact Plus System Administration Guide
It is only necessary to programme the start and stop times for
schedules that are activated automatically.
If you are programming a schedule to start and stop at the same
time each day, use COPY to transfer the settings from one day to
the next.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows Services.
5. Press ≠. The display shows Ringing service.
6. Press ' until the display shows Common settings.
7. Press ≠. The display shows Control extns.
8. Press ' twice. The display shows Schedule times.
9. Press ≠. The display shows Monday.
10. Press ≠. The display shows Sched:Night.
11. Press ≠. The display shows Start time:.
12. Press CHANGE and enter the time you want the schedule to
start.
13. Press '. The display shows Stop time:.
14. Press CHANGE and enter the time you want the schedule to
stop. Press OK to accept a.m. or CHANGE to accept p.m.
15. Press ® to exit or ' to continue programming.
P0607114 Issue 01