Nortel Norstar System Administration Manual page 185

Rem line access
P0607114 Issue 01
Remote line access lets you assign a different remote package to
each line in your system.
L001 Rem pkg
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows System prgrming.
5. Press ≠. The display shows Hunt groups.
6. Press ' until the display shows Remote access.
7. Press ≠. The display shows Remote access pkgs.
8. Press '. The display shows Rem line access.
9. Press ≠. The display shows Show line:.
10. Enter the line number or press LIST to see line 001.
11. Press CHANGE.
12. Enter the number for the remote package that will apply to the
line whenever it is used by a remote caller.
13. Press ® to exit or ' to continue programming.
Remote access 185
Compact Plus System Administration Guide