Using Ring Again - Nortel Norstar System Administration Manual

284 Saving time with features

Using Ring Again

Cancelling Ring Again
Compact Plus System Administration Guide
Enter code:
F_
QUIT CLEAR
Feature code:
QUIT
Feature moved
Press a key
EXIT
Program and HOLD
Program and OK
QUIT OK
If you cannot get through to someone on your Compact Plus
system because their telephone is busy or there is no answer, you
can use the Ring Again feature to tell you when they hang up or
next use their telephone. You can also use the Ring Again feature
to tell you when a busy line pool becomes available.
The Ring Again feature cannot be used with a hunt group.
1. Dial the extension number you want to reach.
2. Before you hang up, press ≤¤.
Press ≤£¤.
Displays
Can't ring again
Ring Again? YES
NO EXIT
If you are checking a Speed Dial key, enter
the three-digit Speed Dial code that you
want to check.
Enter the feature code, or press
QUIT to quit programming or CLEAR to clear
the numbers you have entered. The
system accepts the entry as soon as you
enter a valid feature code.
Press ≤ and enter the feature code you
want to assign to the key. You cannot
enter invalid codes.
You have programmed a key with a
feature that was already programmed to
another key. The feature has moved to the
key you just programmed. Its original key
is now blank.
Press the key you want to check. Press
≤ or EXIT when you are finished.
Enter the number you want to programme
and press ≥ . To erase the key, just
≥
press .
Enter the number you want to programme
and press OK . To erase the key, press
≥ or OK.
You cannot use Ring Again on your current
call. You can only use Ring Again while you
have a busy signal on an internal call or line
pool request, or while an internal call is
ringing.
Press YES to use Ring Again. Press NO if
you prefer to send a message.
P0607114 Issue 01
® or