Nortel Norstar System Administration Manual page 291

Setting which calls are logged at an extension
Setting your Call Log password
To enter Call Log using your password
P0607114 Issue 01
• build a personal telephone directory from log items
The long-distance indicator, as well as the caller's number, may
not be shown in the log, depending on the Call Display services
provided by your local telephone company and the caller's local
telephone company.
You can set which types of incoming calls are logged at your
extension. The options are
• No autologging
• No one answered (only for autologging extensions) (default
setting)
• Unanswered by me (only for autologging extensions) but
answered elsewhere in the system
• Log all calls (including those you answer)—applies to all
lines capable of providing Call Information, even if your
extension is not assigned as an autologging extension for that
line
1. Press ≤•°›.
2. Press £ or NEXT to change the options.
3. Press ≥ or OK to select the display option.
You can set a password for access to your Call Log to keep your
log private. From then on, you must enter this password to view
your Call Log.
1. Press ≤•°fi. The displays shows New passwrd:.
2. Enter your four-digit password. The display shows
Repeat New:.
3. Re-enter your four-digit password. The display shows
Password changed, which confirms that your password has
been assigned.
1. Press ≤°⁄¤ to enter the Call Log. If you have
programmed a password, the display shows Password:.
2. Enter your four-digit password.
If you forget your Call Log password, it can be removed in
programming.
Using display features 291
Compact Plus System Administration Guide