122 Programming Hunt groups
Moving members of a group
Assigning or unassigning lines to a group
Compact Plus System Administration Guide
Member order within a hunt group is important. The member
order determines how a call is routed through a hunt group.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows System prgrming.
5. Press ≠. The display shows Hunt groups.
6. Press ≠. The display shows Show group:.
7. Enter the hunt group number you want to programme (1 to 6).
8. Press ≠. The display shows Member extns.
9. Press ≠. The display shows the members for that
group.
10. Press MOVE to move an existing member to another place
within the hunt group. The display shows the member number
followed by an arrow.
11. Enter the new position number for the extension.
12. Press ® to exit or 'to continue programming.
It is recommended to set the hunt group line Prime extension to
None. Doing so prevents delayed ring transfer of external hunt
group calls to the Prime extension before the hunt group can
receive the call.
You can assign a line to only one group.
1. Place the programming overlay over the appropriate keys on
your programming telephone.
2. Press ≤••¤flfl‹›› (CONFIG). The
display shows Password:.
3. Press ‡¤‡fi°‡ (SAPLUS). The display shows
Terminals&Extns.
4. Press ' until the display shows System prgrming.
5. Press ≠. The display shows Hunt groups.
6. Press ≠. The display shows Show group:.
7. Enter the Hunt Group number you want to programme (1-6).
8. Press ≠. The display shows Member extns:.
P0607114 Issue 01