Ip Broadcast-Address - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
ip bootp-dhcp server <ip-address>
ip-address
Example:
To add station 192.168.37.46 as a bootp/dhcp server to handle bootp/dhcp requests
arriving at the interface "marketing":
Router-1(configure-if:marketing) # ip bootp-dhcp server
192.168.37.46
Done!

ip broadcast-address

User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode.
Use the ip broadcast command to update the interface broadcast address. The
Broadcast address must be filled in with 0s or 1s.
The syntax for this command is:
ip broadcast-address <bc addr>
bc addr
Example:
Router-1(config-if:marketing)#ip broadcast address
192.168.255.255
38
The IP address of the server.
The broadcast IP address
Avaya P460 Reference Guide