Universal Commands; Retstatus Command; Tree Command - Avaya P460 Reference Manual

Universal Commands

Universal commands are commands that can be issued anywhere in the hierarchical
tree.

Retstatus command

Use the retstatus command to show whether the last CLI command you
performed was successful. It displays the return status of the previous command.
The syntax for this command is: retstatus
Example::
P460-1# set port negotiation 2/4 disable
Link negotiation protocol disabled on port 2/4.
P460-1# Router(enable)# retstatus
Succeeded

Tree command

The tree command displays the commands that are available at your current
location in the CLI hierarchy.
The syntax for this command is: tree
Output Example:
Example:
P460-1# tree
terminal
width
length
Avaya P460 Reference Guide
Chapter 1 Using the CLI
5