Security Levels; Entering The Supervisor Level - Avaya P460 Reference Manual

Security Levels

There are four security access levels (modes) – User, Privileged, Configure and
Supervisor.
• The User mode is a general access level used to show system parameter values.
• The Privileged mode is used by site personnel to access switch configuration
options.
• The Configure mode is used by site personnel for Layer 3 configuration.
• The Supervisor mode is used to define user names, passwords, and access levels
of up to 10 local users.
A login name and password are always required to access the CLI and the
commands. The login names and passwords, and security levels are established
using the username command.
Switching between the entities, does not effect the security level since security levels
are established specifically for each user. For example, if the operator with a
privileged security level in the Switch entity switches to the Router entity the
privileged security level is retained.

Entering the Supervisor Level

The Supervisor level is the level in which you first enter Cajun Campus CLI and
establish user names for up to 10 local users. When you enter the Supervisor level,
you are asked for a Login name. Type root as the Login name and the default
password root (in lowercase letters):
Login: root
Password:****
Password accepted.
P460-1(super)#
Defining new users
Define new users and access levels using the username command in Supervisor
Level.
Exiting the Supervisor Level
To exit the Supervisor level, type the command exit.
Avaya P460 Reference Guide
Welcome to P460
SW version 1.0.0
Chapter 1 Using the CLI
9