Set Ppp Authentication Incoming; Set Ppp Baud-Rate - Avaya P460 Reference Manual

Example:
P460-1# set port vlan-binding-mode 5/5-9 static
Set Port vlan binding method:5/5
Set Port vlan binding method:5/6
Set Port vlan binding method:5/7
Set Port vlan binding method:5/8
Set Port vlan binding method:5/9

set ppp authentication incoming

User level: read-write, admin.
Use the set ppp authentication command to define the authentication
method used for a PPP server or client session.
The syntax for this command is:
set ppp authentication incoming {pap|chap|none}
pap
chap
none
Example:
P460-1# set ppp authentication incoming chap
PPP requires CHAP authentication for incoming sessions.

set ppp baud-rate

User level: read-write, admin.
Defines the baud rate used in PPP sessions.
Note: The peer baud rate must be set at the same value as the host.
The syntax for this command is:
set ppp baud-rate <9600|19200|38400>
Avaya P460 Reference Guide
Chapter 2
PAP authentication method
CHAP authentication method
No authentication
Avaya P460 CLI Commands
101