Username - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Use the validate-group command to verify that all the rules in a priority list are
valid.
If there is a configuration problem with a specific rule, or with a number of
rules, detailed error messages will be given.
The syntax for this command is:
validate-group <policy-list-number>[quiet]
quiet
Example:
Router-1(configure)# validate-group 101

username

User level: admin.
Adds a local user account.
By default there is only a single user account, named 'root', with password
'root', which access the administrator level. You cannot delete this basic user
account, nor modify its access level, but can modify its basic password.
The syntax for this command is:
username <name> password <passwd> access-type {read-only|read-
write|admin}
name
passwd
access-type
184
does not display error messages
New user name (minimum four characters)
User's password (minimum four characters)
Access type definition - read only, read-write or
administrator
Avaya P460 Reference Guide