Show Ip Route Static; Show Ip Route Summary - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Example:
Router-1> show ip route best-match 199.93.0.0
Searching for: 199.93.0.0
Showing 1 rows
Network
--------------- ------------------------------------------------
199.93.0.0

show ip route static

User level: read-write, admin.
Use the show ip static route command to display the static routes.
The syntax for this command is:
show ip route static [<ip addr> [<mask>] ]
ip-address
mask
Example:
Router-1> sh ip route static
Showing 34 rows
Network
-------------
10.0.8.0
135.0.0.0
135.64.0.0
149.49.0.0
149.49.2.0

show ip route summary

User level: read-only, read-write, admin.
Use the show ip route summary command to display the number of routes
known to the switch.
The syntax for this command is:
show ip route summary
138
Mask Interface
255.255.0.0 e-135new
The IP address of the routes
The ip mask of the routes.
Mask Interface
----------------------------------------------------
255.255.255.0e-36
255.0.0.0 e-135new
255.255.0.0 e-135
255.255.0.0 zevel10.10.254.2531lowYes
255.255.255.0n/av-Route-FW1highYes
Next-Hop Cost TTL
135.64.76.1 1
Next-Hop Cost PrefActive
149.49.36.11 1 high Yes
135.64.76.11 high Yes
135.87.164.1 1 high No
Avaya P460 Reference Guide
Source
-----
n/a STAT-HI