Set Spantree Priority Command; Set Autopartition Command; Set License Command - Avaya P333T User Manual

Chapter 6 Cajun Campus CLI – Layer 2

Set spantree priority Command

Use the set spantree priority command to set the bridge priority for STP.
The syntax for this command is:
set spantree priority <bridge_priority>
bridge_priority
Example:
This example shows how to set the bridge priority to 45000:
Cajun_P330-N# set spantree priority 45000
Bridge priority set to 45000.

Set autopartition Command

Use the set autopartition command to enable or disable auto-partitioning on
all the half duplex ports of the stack.
The syntax for this command is:
set autopartition {enable|disable}
Example:
Cajun_P330-N# set autopartition enable
Auto-partition is enabled.

Set license Command

The set license command enables you to activate the SMON capability of the
Cajun™ P330 stack. An Avaya P330 stack can include several Avaya P330 modules.
One SMON license is required per Avaya P330 stack. Installing the license is very
simple. It involves connecting a terminal to one of the Avaya P330 modules and
typing in a valid license number (included in the SMON License pack) using the
CLI.
For a full description of the SMON License and the installation procedure please
refer to the Installation Guide provided with the SMON License.
98
Number representing the priority of the bridge.
The priority level is from 0 to 65535, with 0 indicating high
priority and 65535 indicating low priority.
Avaya P333T User's Guide