Banner Login; Banner Post-Login - Avaya P460 Reference Manual

Example:
To set the arp timeout to one hour:
Router-1(configure)# arp timeout 3600
To restore the default arp timeout:
Router-1(configure)# no arp timeout

banner login

Use the banner login command to enter the login banner configuration mode.
Use the no banner login command to set the login banner to the default value.
Before creating a new banner, delete the current banner using the no banner
login command.
The syntax for this command is:
[no] banner login
Example:
P460-1(super)# banner login
P460-1(super)#

banner post-login

Use the banner post-login command to enter the post-login configuration
mode.
Use the no banner post-login command to set the post-login banner to the
default value.
Before creating a new banner, delete the current banner using the no banner
post-login command.
The syntax for this command is:
[no] banner post-login
Example:
P460-1(super)# banner post-login
P460-1(super)#
Avaya P460 Reference Guide
Chapter 2 Avaya P460 CLI Commands
15