Show Ip Reverse-Arp; Show Ip Route - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

show ip reverse-arp

User level: read-only, read-write, admin.
Use the show ip reverse-arp command to display the IP address of a host,
based on a known MAC address.
The syntax for this command is:
show ip reverse-arp <mac addr> [<match len>]
mac addr
match len
Example:
Router-1> sh ip reverse-arp 00:10:a4:98:97:e0
Showing 1 rows
Address
--------------- ----------------- ----------- -------
149.49.70.68

show ip route

User level: read-only, read-write, admin.
Use the show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
136
MAC address
The number of bytes in the address to match
MAC Address
00:10:a4:98:97:e0
I/F Type
e-70 Dynamic
Avaya P460 Reference Guide
TTL
--------
14355