Set Broadcast Storm Control Threshold; Set Device-Mode - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
set broadcast storm control <enable|disable>
enable
disable
Example:
P460-1# set broadcast storm enable
Done!

set broadcast storm control threshold

User level: read-write, admin.
Use the set broadcast storm control threshold command to set the
broadcast storm control threshold.
The syntax for this command is:
set broadcast storm control threshold <threshold>
threshold
Example:
P460-1# set broadcast storm control threshold 1000
Done!

set device-mode

User level: read-write, admin.
Use the set device-mode command to set the switch mode – Layer 2 or Router
(Layers 2 and 3).
74
Enable broadcast storm control
Disable broadcast storm control
In pps (packets per second) from 10 to 144,000 pps
The default value is 500
Avaya P460 Reference Guide