Show Port Auto-Negotiation-Flowcontrol-Advertisement - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
Show Port Output Fields
Port
Name
Status
Vlan
Level
Neg
Dup
Speed
Type

show port auto-negotiation-flowcontrol-advertisement

User level: read-write, admin.
Use the show port auto-negotiation-flowcontrol-advertisement
command to display the flowcontrol advertisement for a Gigabit port used to
perform auto-negotiation.
The syntax for this command is:
set auto-negotiation-flowcontrol-advertisement [module/port]
[mode]
module
port
mode
158
Description
Switch and port number
Name of port
Status of the port (connected, faulty, disabled)
VLAN ID of the port
Priority level of the port (0-7)
The autonegotiation status of the port (enabled, disabled)
Duplex setting for the port (full, half)
Speed setting for the port (10, 100, 1000)
Port type, for example:
10/100BASE-TX, GBIC_SX, GBIC_LX, GBIC_not present,
GBIC_unknown
Number of the module
Number of the port
no-flowcontrol, asym-tx-only, sym-only or sym-and-asym-rx
Avaya P460 Reference Guide