Show Environment Fans; Show Environment Power - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
show dynamic vlans
Router-1> show dynamic vlans
VLAN NAME
---------------- ------- -----------------
Default

show environment fans

User level: read-only, read-write, admin.
Use the show environment fans command to display the current fans status
for the switch.
The syntax for this command is:
show environment fans
Example:
P460-1> show environment fans
Mode: regular
Total working fans: 9
Mode
Total working fans
Fans not installed

show environment power

User level: read-only, read-write, admin.
Use the show environment power command to display the current power
configuration for the switch, the total power available to the system, and amount of
power currently in use.
The "total power drawn from the system" includes two supervisor modules and
the fan module, irrespective of the number of supervisor modules installed.
The "Demands" column shows the demand for an I/O module whether its slot
is enabled or not.
128
VLAN ID VLAN MAC
1 02:e0:3b:1d:f9:01
• Boost
• Regular
• 9
• 8
• less than 8
• No fan tray installed
Avaya P460 Reference Guide