Set Autopartition; Set License - Avaya P333T User Manual

Chapter 6 CLI – Layer 2
Example:
To set the priority to 45000:
P330-N# set spantree priority 45000
Priority enabled

set autopartition

Use the set autopartition command to enable or disable auto-partitioning on
specific switches of the stack.
Note: This command can not be executed on the P332G-ML and P332GT-ML
switches. This command is used to set the autopartition status for the other P330
switches in the stack.
The syntax for this command is:
set autopartition <enable|disable>[module]
Output Example:
P330-N# set autopartition enable 3
Auto-partition is enabled in module 3.

set license

The set license command enables you to activate the SMON/routing
capability of the Avaya P330 stack. An Avaya P330 stack can include several Avaya
P330 switches. One SMON/routing license is required per Avaya P330 stack.
For a full description of the SMON/routing License and the installation procedure
please refer to the Installation Guide provided with the SMON/routing License.
The syntax for this command is:
set license [module] [license] [featureName]
module
license
featureName
Example:
P330-N> set license 1 021 1ad bad ca5 8d2 ccd smon
116
The switch number
The license number
The name of the feature, either smon or routing
Avaya P333T User's Guide