Show Spv - Avaya P460 Reference Manual

Output fields:
Field
Spanning tree
Designated root
Designated Root
Priority
Designated Root Cost
Designated Root Port
Root Max Age
Hello Time
Bridge ID MAC ADDR
Bridge ID Priority
Port
Port-State
Cost
Priority

show spv

User level: read-only, read-write, admin.
Use the show spv command to display the following information about supervisor
modules:
• Chassis MAC address
• SPV status – active, standby, halted.
• Indication whether the SPV's are synchronized.
• Software version of the two image banks.
Avaya P460 Reference Guide
Chapter 2
Description
Spanning-Tree Protocol status (enabled or disabled).
MAC address of the designated spanning-tree root
bridge
Priority of the designated root bridge.
Total path cost to reach the root.
Port through which the root bridge can be reached
(shown only on non root bridges)
Amount of time a BPDU packet should be considered
valid
Number of times the root bridge sends BPDUs
Bridge MAC address used in the sent BPDUs
Bridge Priority
Port number
Spanning-tree port state (disabled, inactive, not-
connected, blocking, listening, learning, forwarding,
bridging, or type-pvid-inconsistent)
Cost associated with the port
Priority associated with the port
Avaya P460 CLI Commands
173