Set License Command; Set Internal Buffering Command - Avaya P333R-LB User Manual

Chapter 5 Cajun Campus CLI – Layer 2
Example:
P330-N# set autopartition enable 1
Auto-partition is enabled on module 1.

Set license Command

The set license command enables you to activate the SMON capability of the
Avaya P330 stack. An Avaya P330 stack can include several Avaya P330 modules.
One SMON license is required per Avaya P330 stack.
For a full description of the SMON license and the installation procedure please
refer to the Installation Guide provided with the SMON license.
The syntax for this command is:
set license [module] [license] [featureName]
Example:
P330-N> set license 1 021 1ad bad ca5 8d2 ccd smon

Set internal buffering Command

The set internal buffering command allows you to set the size (either
Maximum or Minimum) of the Receive (Rx) buffer allocated to each port of the
specified module. This command is meaningless when any port of the module is
operating with flow control ON.
The syntax for this command is:
set internal buffering <mod_num> {max|med|min}
max
med
min
Example:
P330-N> set internal buffering 1 max
Done.
118
Sets the internal receive buffer to its maximum size.
Sets the internal receive buffer capacity dynamically
Sets the internal receive buffer to its minimum size (this is the
Default).
Avaya P333R-LB User's Guide