Show Port Classification; Show Port Flowcontrol - Avaya P460 Reference Manual

Chapter 2 Avaya P460 CLI Commands

show port classification

User level: read-write, admin.
Use the show port classification command to display a port's
classification.
The syntax for this command is:
show port classification [module/[port]]
module
port
(Optional)
Example:
P460-1> show port classification 4/8
Port
------ ---------------------
4/8
P460-1> show port classification 4/9
Port
------ ---------------------
4/9

show port flowcontrol

User level: read-only, read-write, admin.
Use the show port flowcontrol command to display per-port status
information related to flow control.
The syntax for this command is:
show port flowcontrol [<module>[/<port>]]
module
(Optional)
160
Number of the module (3-6). If you do not specify a
number, the ports on all the modules are shown.
Number of the port on the module. If you do not
specify a number, all the ports on the module are
shown.
You can also specify a range of ports separated by a
dash, for example, 4/5-13 for ports 5 to 13 on
module 4.
Port Classification
regular
Port Classification
valuable
Number of the module (3-6). If you do not specify a number, all
modules are shown.
Avaya P460 Reference Guide