Attendant Camp-On - NEC Xen IPK Features & Specifications Manual

Attendant Camp-On

FEATURE
DESCRIPTION
SYSTEM
AVAILABILITY
OPERATING
PROCEDURES
Features and Specifications Manual
The Attendant Camp-On feature, used at an Attendant Position with an
Attendant Add-On Console, allows a call to be transferred to a busy station.
Press the Transfer key on the Attendant Add-On Console to send the
Camp-On tone to the busy station. A camped on call that is not answered in
a preprogrammed time recalls to the Attendant Position.
Terminal Type
Any terminal with Display programmed as an Attendant Position.
Required Components
DCR-60-1A( ) or DCU-60-1A( ) Console.
To use this feature at an Attendant Position with a CO/PBX Call in
progress:
1. Press the DSS/BLF key on the Attendant Add-On Console or the
Attendant Position for the desired station.
2. Receive call waiting tone.
N
3. Press on the Attendant Add-On Console or on the Attendant
Position. Camp-On is set.
4. Go on hook.
5. After time-out, if the Camp-On is not answered, a recall tone is
received at the Attendant Position, and the LED on the assigned CO/
PBX line key or Call Appearance Key returns to flashing green.
6. Press the CO/PBX line key with the flashing green LED to return to
the call.
To answer a Camp-On Call from a Multiline Terminal:
1. The user is engaged in a call.
2. Receive a camp-on tone. The
flashes green, and CO/PBX line flashes green, if assigned.
O
3. Press and talk with the CO/PBX incoming caller. The previous
call is put on hold.
A-12
O
flashes red, the Large LED
A12 – 49