NEC Xen IPK Features & Specifications Manual page 432

Phone system

Hide thumbs Also See for Xen IPK:

Table of Contents

If the PHS phone is set with CFA, all calls go immediately to the

Personal VM Greeting Message.

A maximum of four PS handsets should be programmed with the same

Call Arrival Key (CAR). A maximum of four PS handsets within the

same Call Area will ring simultaneously when receiving incoming

outside calls on CAR keys.

Maximum allowable placement.

Each base station provides 3 voice channels (3 simultaneous

conversations. If a greater amount of simultaneous call traffic is

expected in an area, increase the number of base stations in that zone

to provide additional voice channels.

Each base station covers an area of approximately 100 meters in

radius. This distance however, depends very much on the nature of the

site, e.g.: the materials used in the construction of the building, the

layout of the building, the height and location of the base station, etc.

A site survey should be performed before installation of the system to

determine the optimum locations for the base stations. Base stations

should be positioned so that a degree of overlap is provided in the

coverage of each unit, ensuring reliable hand over of calls when

moving between cells.

One base station in a system must be a BS21(AU)-ID unit (master).

The remaining base stations must be BS21(AU)-ND units (slaves).

Data Communication is not supported with this system.

Xen IPK Expanded

the 1st, 2nd

NEC Business Solutions Ltd

Xen IPK Basic

the 1st, 2nd

Multi-Zone Digital Cordless